Copyright
©
2016
congatec
AG
TSSLm11.indd
102/132
Feature
Options
Description
SATA Test Mode
Enabled
Disabled
Only enable this feature for verification measurements.
Alternate ID
Enabled
Disabled
Enable this feature to report an alternate device ID.
Note:
Displayed only for RAID SATA mode.
►
Software Feature Mask Configuration
Submenu
RAID option ROM and Intel
®
Rapid Storage Technology driver will refer to the ‘Software Feature
Mask Configuration’ to enable or disable the storage features.
Aggressive LPM Support
Enabled
Disabled
Enable PCH to aggressively enter link power state.
Serial ATA Port 0, 1, 2, 3
No option
Displays the name of the connected Hard Disk or DVDROM if the port is enabled. No options are
displayed if the port is disabled or when the port is enabled but no device is connected to it.
Software Preserve
No option
Indicates whether the detected drive supports software settings preservation.
SATA Port
Disabled
Enabled
Enable or disable the relevant SATA port.
Hot Plug
Disabled
Enabled
Enable or disable hot plug support for relevant SATA port.
External SATA
Disabled
Enabled
Enable or disable external SATA support on relevant SATA port.
Spin Up Device
Disabled
Enabled
Enable this feature to run an initialization sequence for the connected device during startup at
relevant SATA port.
Note:
Enable this feature if your hard disk or special (special) solid-state drive requires it.
SATA Device Type
Hard Disk Drive
Solid State Drive
Select whether the relevant SATA port is connected to solid-state drive or a hard disk drive.
Topology
Unknown
ISATA,
Direct Connect
Flex
M2
Select the SATA topology.
Device Sleep
Disabled
Enabled
Enable or disable mSata for RTD3.
SATA DEVSLEP Idle Timeout Config
Disabled
Enabled
Enable or disable SATA DTIO Config.
