Copyright
©
2018
congatec
GmbH
TSCOm17
31/75
6.1.3.1
DisplayPort (DP)
The conga-TS370 offers three dual mode DP ports (DP++). These interfaces support:
•
all mandatory features of the VESA DisplayPort Standard version 1.2, including MST for monitor daisy-chaining, stereoscopic 3D frame
transport
•
maximum bit rate of 5.4 Gbps
•
High-bandwidth Digital Content Protection (HDCP 2.2)
•
AC-3 Dolby Digital, Dolby Digital Plus, DTS-HD, LPCM, 192 kHz/24 bit, 8 channel, Dolby TrueHD, DTS-HD Master audio formats
Note
Only two independent DP displays are supported if the VGA interface is enabled.
6.1.3.2
LVDS/eDP
The conga-TS370 offers an LVDS/eDP interface. This interface is configured in the BIOS to support LVDS by default. For eDP support, go to
Advanced -> Graphics -> Active LFP Configuration of the BIOS setup menu and select “eDP”.
The LVDS
1
interface supports:
•
single or dual channel LVDS (color depths of 18 bpp or 24 bpp)
•
integrated flat panel interface with clock frequency up to 112 MHz
•
VESA and OpenLDI LVDS color mappings
•
automatic panel detection via Embedded Panel Interface based on VESA EDID
TM
1.3
•
resolution up to 1920x1200 in dual LVDS channel mode
The eDP
1,2
interface supports:
•
eDP 1.4 specification
•
Spread-Spectrum Clocking
•
eDP display authentication
Note
1.
The LVDS/eDP interface does not support LVDS and eDP signals at the same time.
2.
The eDP interface does not support HDCP
