Placing the Vibration Plate Power Plus on an uneven
floor can cause it to wobble during use and may
cause the incline adjustment to function incorrectly.
To prevent this from happening, two stabilizers have
been installed underneath of the base board and
these should be adjusted correctly prior to use.
1.
Shake the support tube back and forth to
check if the machine is resting flat on the
floor
2.
Adjust the stabilizers (A) until they securely
support the Vibration Plate Power Plus on the
floor. See FIG 5
3.
Tighten the locking nuts (B)
4.
Check again to see if the machine is in a stable position on the floor and repeat
adjustment if necessary
TRANSPORT WHEELS
Two transport wheels (see FIG 5, C) are fitted
Underneath the Vibration Plate Power Plus to allow
it to be moved easily
Incline the Vibration Plate Power Plus backwards,
hold the Heart Rate Sensor handle to move it
forwards. See FIG 6.
