Important hazard and safety notes
Please carefully read the below hazard and safety notes before using the hight adjustment unit.
Electrical safety
Connect unit to a free accessible 110 – 230 V / 50 Hz grounded power outlet only.
Make sure, the unit can be immediately separated from the power outlet.
Only use unit in dry rooms, protect unit from water and other liquids.
Clean center column with dry cloth only.
Do not open lift unit.
RISK OF ELECTRIC SHOCK.
There are no serviceable parts inside.
In case of malfunction unplug unit from power outlet and call your dealer.
Do not overrun the power cord or damage it in any other way. Replace damaged power
cord immediately.
Ensure easy access of wall socket and power strip attached to the unit.
The device is not water proof.
Do not place liquids on the table.
General hints for mechanical safety
Max. load capacity of the lift unit is 300 lbs. Do not add any additional weight to the system,
other than the components described in this manual.Do not sit, hang or lie on the table!
! VERY HEAVY UNIT.
Severe risk of injury when unit tips over due to improper use.Before adjusting height or tilt of
the table, ensure no person or object is within 20 cm from the moving parts of the table, in
order to avoid getting trapped or squeezed. In case of accident immediately release the button
on the remote.
This will immediately stop the unit.
Special hints for moveable und free standing units
Only operate unit on plane and stable floors. Move unit on plane floors only.
Beware when moving the unit; risk of tipping over when overrunning floor unevenness,
wdoor sils or similar.
! VERY HEAVY UNIT.
Severe risk of injury when unit tips over.
Lock brakes of front wheels when operating unit.
I
nstructions for disposal
Do not dispose to consumer waste.
Conen Produkte GmbH & Co. KG
Conenstr. 4
54497 Gonzerath
Germany
www.conenmounts.com
