3
Attach Control Pad & Finger Touch Unit and feed cables (parts supplied with projector)
Feed the cable, which links FTU to the projector, through
the opening in the board and plug in the connector.
Plug in both cables into the Control Pad (USB + 3.5mm
audio).
7
8
Attach Finger Touch Unit with 3 x Phillips head screws
(0.165” x 1.25”).
Attach Touch Panel with 4x Phillips head screws
(0.165" x 0.63").
5
6
Feed all cables to the projector
through the projector arm (from
bottom to top of the arm).
9
work
IT
desk
interactive ta
ble
