work
IT
desk
interactive table
3
Attach Control Pad & Finger Touch Unit and feed cables
(parts supplied with projector)
Feed the cable, which links FTU to the projector, through
the opening in the board and plug in the connector.
Plug in both cables into the Control Pad (AC Power Cable
Cat6 network cable (not included) USB-B cable (not
included).
7
8
Attach the finger touch module with 2 x Phillips head
screws (0.14" x 1.4") to the board surface at approx. 7"
from top of the board.
Attach touch panel with 4 x Phillips head screws
(0.165" x 0.63").
5
6
Feed all cables to the projector
through the projector arm (from
bottom to top of the arm).
9
Secure the AC adapter bracket with 4 x Phillips head screws (0.16" x 0.63") to the back
of the board. Slide in the adapter.