2
Mounting the table unit
Unpack boxes 1 of 4 (Mobile base) and 2 of 4 (Motorized
center column) and attach base to column using the
4 x M8 x 40 (1/3" x 1.6") Allen 4 washers.
Unpack box 3 of 4 (Board frame w. tilt actuator) and attach
frame to column using the 4 x M8 x 40 (1/3" x 1.6") Allen
4 washers.
Make sure to run the two cables exiting the column through
the cut out of the board frame before securing the 4 bolts.
1
2
Unpack box 4 of 4 (50" x 67" table top) and hang the
board onto the frame.
Secure the board
to the frame
using the 4 x M6 x
70 (0.23" x 2.75")
Allen head
screws.
They need to be
inserted in the
outer most holes
on top and bot-
tom of the frame.
Release the two bolts on the brackets on the back of
the board and slide in the projector arm to its lowest
position. Secure the arm by tightening the bolts on
both top and bottom bracket.
3
4
6.
5"