background image

CGU 04i   DESCRIPTION 

 2. Description of the communication module CGU 04i 

 2.1. General 

GSM/GPRS communication module CGU 04i is a wireless data transmission device. 

The communication module is one of the basic elements of AGNES GPRS system. 
The system AGNES characteristics are described in reference 

[1]

. GSM-GPRS infrastructure 

is used for the wireless communication as a line layer. ARNEP protocol is implemented above 
the line layer. The protocol ARNEP is described in reference 

[2]

. On its basis the modules 

create virtual private data network where data can be transferred between user devices via 

any protocols. 

One may simply imagine the CGU 04i module as a protocol converter between 

the user device (PLC automatic, PC, data terminal, etc.) and GSM-GPRS infrastructure 
of a mobile network operator, it provides the user with possibility to communicate simply 
between all the systems. Apart from data transfers via GPRS the CGU 04i module enables 

SMS. 

The radio component GSM-GPRS is built in the CGU 04i module, consisting module 

Cinterion. 

GSM-GPRS module CGU 04i is controlled by communication 32-bit microprocessor. 

It ensures GSM-GPRS communication, data transfer on serial user interfaces and a number 
of diagnostic and service features. CGU 04i module in the basic version has one serial user 

interface (communication port) RS232, one interface for direct connection of inputs 
and outputs (CIO) for data collection and technological process management and one optional 
user interface (RS232, RS422, RS485, M-BUSD, CNT). It is possible to set transfer 
parameters and communication protocol for each user interface separately. As a result you 
may communicate with various user interfaces using different communication protocols on 

serial interface. 

 2.2. Examples of possible applications 

 Security 

systems 

 Telematics 

 Telemetry 

  Vending and dispenser machines 

 

 2.3. Compatibility with other Conel company modems 

Regarding the communication and data transfers the CGU 04i module is compatible 

with the older CGU 04 type (or CGU 02). This means it is possible to combine both types 
in one network and simply extend an existing network of CGU 04 (CGU 02) modules 

with new communication points using CGU 04i modules. CGU 04i provides some features not 
included in the older CGU 04 type. 

User and industrial communication protocol implemented on serial interfaces are 

compatible with the protocols used for Conel radio modems (e.g. CDA 70). Thus you may 
establish complex combined data networks consisting of both radio and GPRS modems. 

Summary of Contents for CGU 04i

























































Reviews: