Condux Gulfstream 35, Product Manual

Page: 21 / 21

- 21 -
08785150
This limited warranty provided by Condux
International, Inc. (Condux) is subject to the expressed
terms and conditions described herein. Condux warrants
to the machine’s original buyer (“BUYER”) that this
compressor unit conforms to applicable drawings and
specifications approved in writing by Condux. The
machine will be free from defects in material and
workmanship for the period of time listed in the chart
below while the machine is owned by BUYER.
*Every Condux rotary screw airend comes prefilled
with ShieldWorks, and the BUYER initiates the lifetime
warranty program with completion of the lifetime
warranty registration card. To continue the lifetime
warranty coverage, this product must be registered and
maintained according to the proper schedule. After
purchase, ShieldWorks lubricant and oil filter must be
replaced at fifty (50) hours of use. At one (1) year or
five hundred (500) hours, whichever comes first, a
complete service must be performed to maintain the
warranty status, along with providing maintenance
records to Condux. After the initial year, the
maintenance schedule should be followed per your
provided manual, with record retention.
This warranty covers net cost of the part only. Labor,
mileage, and travel time, including diagnostic calls to
analyze the problem, are not covered by this or any
other warranty. In the event of a warranty claim by an
end-user, an authorized Condux distributor shall be
responsible for the initial investigation and warranty
claim. The remedy of repair or replacement parts shall
be carried out by Condux or an authorized distributor.
Component Warranty Period
Rotary Screw Airend with Continuation
of ShieldWorks Maintenance Plan
Lifetime*
Rotary Screw Airend 30 Months
All Other Parts Manufacturer’s Warranty
WARRANTY
STATEMENT
This warranty is not transferable. The total
responsibility of Condux for claims, losses, liabilities,
or damages, whether in contract or tort, related to its
products shall not exceed the purchase price. In no
event shall Condux be liable for any special, indirect,
incidental, or consequential damages including, but not
limited to, loss of use of facilities or equipment,loss of
profits, property damage, or lost production, whether
suffered by BUYER or any third party. Warranty will
be void if product is altered without written approval
by Condux. Condux shall have no responsibility for any
cost or expense incurred by BUYER if damage results
from accident, misuse, neglect, improper installation,
or the use of replacement parts or fluids not of Condux
manufacture. Wear caused by chemicals, abrasions, or
excessive heat is not considered a defect and is not
covered by this warranty. Maintenance and wear items
such as lubricants, belts, seals, and filters are not
warrantable items.
BUYER must provide written notice of each occurrence
of an alleged defect in material or workmanship. If the
machine is within the specified warranty period and has
been registered and maintained according to the proper
schedule, Condux will provide return shipping
instructions. Upon return of the item FOB Condux
original shipping point, Condux will repair or replace
the item or issue credit for replacement, provided it is
found to be defective. Defective material must be
returned within thirty (30) days of receiving return
instructions from Condux. Failure to do so within
specified time will result in forfeiture of claim.
Failure to follow procedures as laid out in this warranty
statement may cause forfeiture of claim. Excess freight
charges from failure to follow shipping instructions will
be deducted from credit. Distributors or end-users
automatically deducting the value of a warranty claim
from outstanding balances due prior to receiving written
notification of Condux approval of the warranty claim
may be subject to forfeiture of the entire claim.
Condux International, Inc.
145 Kingswood Drive
Mankato, MN 56002
800-533-2077