Condux Gulfstream 35, Product Manual

Page: 10 / 21

- 10 -
08785150
Mounting the Compressor
When mounting the compressor, care should be taken
to ensure that its location does not impede the
operation of other components on the vehicle. For
example, if your vehicle is equipped with a crane, you
must make sure the compressor will not interfere with
the swing of the crane. In addition, the compressor
should be installed in an area that permits cool
ambient air to enter the air filter and the hot air to
exhaust without recirculating into the machine. A
minimum of 10” of clearance is needed for the hot
discharge air from the cooler. A minimum of 10” of
clearance is required from the rear of the compressor
to allow for proper air intake. Cool ambient air is
drawn in from the rear of the machine. The unit
should be secured to the vehicle with four 3/8” grade
8 bolts, flat washers, and loc washers. Ensure that
you have a sub structure that will support the weight
of the compressor. Be sure to follow all National
Vehicle Safety Standards.
Installation & Operation