Condux CableGlider LW, User'S Manual & Safety Manual

Page: 11 / 22

11
3. Remove Lock Pins from
square adapter and slide over
Mounting Tube on Power
Unit. Reinstall Lock Pins.
(See Figure 2)
Figure 2
4. Slide Sheave Extension into
Square Adapter. Reinstall
Lock Pin. (See Figure 3).
Sheave Extension can be
adjusted to desired height
during puller set-up.
Figure 3
5. Remove Hitch Pin from
Extension Head Bracket and
slide Fork over Sheave
Bracket and replace Hitch Pin
(See Figure 4)
Figure 4
6. Puller is completely assembled.