CONDTROL 3-17-023, Manual

Page: 5 / 25

8 9
User manual
THERMAL IMAGER
IR-CAM1 CONDTROL
User manual
THERMAL IMAGER
IR-CAM1 CONDTROL
Switch off: press and hold for 2 seconds .
Use buttons , to select POWER OFF and
pull the trigger.
Menu
Switch on the device. Short press to enter menu.
Description of menu items is presented in the table below:
Touch screen
Beside keyboard and trigger, the thermal imager can be controlled via touch screen. To change
the settings or activate functions in the menu, tap on required part of the screen.
OPERATION
Battery charging
The device is powered by the built-in rechargeable Li-ion 2500 mAh battery.
Charge the battery before using the device for the first time:
1) Take miniUSB cable and insert the USB connector into power source.
2) Insert miniUSB connector into the power jack in the device.
3) Symbol will remain on the display while charging. It takes 5-6 hours to fully charge
the battery.
4) As soon as the battery is fully charged, symbol will appear on the display. Disconnect
the device from the power source. The device is ready for use.
Switch on/off the device
Switch on: press and hold for 2 seconds .
Symbol Description
Display brightness
Date and time
Display backlight timer
Color temperature alarm