7
3. Assemble the transducer
a) Slightly spread the pivot and match the transducer to the pivot. The toothed surface
make them not separating easily.
Note: when match the transducer and pivot, please be careful not assembling them
reversedly (see figure-2). a) right b) wrong)
Figure 2 a)
b)
b) Put the locking nut into the slot of pivot then insert the pivot bolt, hand-tighten the pivot
bolt.(figure-3)
Note: Do not overtighten the pivot-bolt with Allen wrench, otherwise you will not being
able to adjust the angle of transducer
c) Match the pivot to the template.(figure-4)
Figure-3
Figure-4
