Condor 345c df Operation Manual Download Page 35

Page: 35 / 36

Specifications and features

Specifications Condor 340c

Depth Capability……................................................….….………...…...800 feet (270 m)

Operating frequency........…………...............…..........………………………...…200 KHz

Sonar coverage..................................................……......…………… 20 degree at -3db

Power Output……………………….……….200

watts (RMS), 1600 watts (peak-to-peak)

Power Requirement..............................................………..………………………..DC 12V

Resolution.....................................................………………………………...480V X 272H

Operational Temperature...................…........….............……..-10C to 50C (14 Fto122 F)

Unit Dimensions................................................... 5.8" x 5.3" x 2.5" (148 x 136 x 64 mm)

Specifications Condor 345c df

Depth Capability……....................................…...........………………...2100 feet (700 m)

Operating frequency........…………...............…..........…………………….…200 / 50 KHz

Sonar coverage..................….....................................…………… 12 / 35 degree at -3db

Power

Output……………………………..….50

watts

(RMS),

4000

watts

(peak-to-peak)

Power Requirement..............................................………..………………………..DC 12V

Resolution.....................................................………………………………...480V X 272H

Operational Temperature...................…........….............……..-10C to 50C (14 Fto122 F)

Unit Dimensions....................................................

5.8" x 5.3" x 2.5" (148 x 136 x 64 mm)

Features

High-resolution 4.3" (110 mm) diagonal Color TFT LCD

Perfect visibility even with polarized sunglasses

65.536 colors screen

3 color display modes, including night view mode

Real time sonar

Back-up memory: Built-in memory stores sonar settings when the unit is turned off.

Choose detecting range automatically

Complete IPX7 Waterproof casing

Note: Our company holds the right to update the products, and it is not obligated for our
company to update the former products according the new standard.

Summary of Contents for 345c df





































Search results

Summary of Contents for 345c df

Reviews:

Related manuals for 345c df

Brands by name

Popular brands

Condor 345c df, Operation Manual

Search results

Summary of Contents for 345c df

Reviews:

Related manuals for 345c df

Brands by name

Popular brands