12
Product overview
4.2
Functional description
The Condair RH-DS steam humidification system consists of the Condair RH steam humidifier and the
Condair DS steam distribution unit and has a maximum steam output of 1.8 kg/h.
The steam humidifier can either be mounted on a wall or suspended from a ceiling (e.g. between the
pipes of the ventilation unit) using the ceiling bracket available as an accessory.
The ready-to-install steam distribution unit from the factory can be easily installed in the supply air duct
of the residential heat recovery ventilation system (HRV) through the reductions which are available in
various sizes.
The Condair DS steam distribution unit can be integrated into both horizontal or vertical supply air ducts
of a HRV and also allows for the comparatively simple placement of the sensors, even in confined spaces
within the HRV's piping.
The steam distribution pipe inside the steam distribution unit allows for condensate and aerosol-free
steam distribution under strongly varying supply air conditions (temperature and air volume flow) in a
residential heat recovery ventilation system (HRV). Due to the special design of the steam distribution
pipe, the humidification distance is very short and takes the often very limited space for residential heat
recovery ventilation system into account.
The condensate that forms in the steam distribution pipe of the steam distribution is discharged through
the condensate drain line or flows through the steam hose back into the steam cylinder of the Condair
RH steam humidifier.
4.3
Accessories
The following accessories are available for the Condair RH-DS steam humidification system:
Accessories
Description
Reductions
Reductions with lip seals for connecting the steam distribution housing
to the supply air line.
Available reductions:
The reductions are available:
– DN125
– DN150
– DN160
Ceiling bracket RH
Ceiling bracket for the hanging installation of the Condair RH .
Air flow monitor
Air flow monitor for duct installation for monitoring the air flow in the
supply air duct (see also humidity control variants in
).
Steam hose DS22
For connecting the steam outlet of the steam humidifier with the steam
connection of the steam distribution unit.
Insulation hose
EcoTherm
For the insulation of the steam hose.
Condensate hose KS10
For draining the condensate from the steam distribution pipe of the
steam distribution unit.
Slotted fabric hose
For the insulation of the condensate hose.
Filter valve Z261
Filter valve for installation in the water supply line.
Note: Installation accessories (e.g. DN180 pipe clamps) must be provided by the customer.
