EN
88
VR2000
CLEANING PLANNING
To set the cleaning mode, press the button
on the remote control. At first, two digits begin to flash to set
the time. To set the values, use the
˄ ˅
buttons. Confirm the time by pressing the
OK
button. Then the right side
of the display starts to flash to set the minutes. Follow the same steps as the hour setting.
The vacuum robot will vacuum each day at the time you have set.
To cancel the scheduled cleaning, set the scheduled cleaning time to 00:00.
MOPPING THE FLOOR
If you have a water tank installed, the
vacuum robot automatically enters
the mopping the floor mode. Water
spontaneously passes through the
mopping cloth. The water tank is
washable. Always pour the water only
after removing the water tank from the
body of the vacuum robot.
WATER TANK
1. Rubber closure
2. Water tank
3. Dust bin
BOTTTOM SIDE OF THE WATER TANK
1. Mopping cloth
2. Velcro fastener
3. Water inlets
1
2
3
1
2
3
Open the sealing cap and fill
with water, close the sealing
cap after filling.
