EN
EN
57
56
VP 803x
VP 803x
SERVICE
Any larger maintenance or repairs requiring intervention into the internal parts of the product shall only be
performed by an authorized service
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into
household waste. It must be taken to the collection point of an electric and electronic
equipment recycling facility. By making sure this product is disposed of properly, you will
help prevent the negative effects on the environment and human health that would
otherwise result from inappropriate disposal of this product. You can learn more about
recycling this product from your local authorities, a household waste disposal service or in
the shop where you bought this product.
4. Insert the cleaned or new motor filter into the appliance and close the cover.
CLEANING AND REPLACING THE AIR OUTLET FILTER
1. Open the air outlet grid in the appliance‘s rear section (Fig. 5).
2. Remove the air outlet filter. You can clean this filter by tapping it, then brushing it with a soft brush. After
this operation is complete, you may clean a very dirty filter by washing and brushing with a soft brush in
lukewarm water with no cleaning agents added. It is important to let the wet parts dry thoroughly. A wet
filter will be damaged by vacuuming! Do not use a hair dryer to dry it!
Note:
Wet cleaning may cause more wear and tear of the filter and, consequently, may shorten its service
life.
3. Insert the cleaned or new air outlet filter into the appliance and close the air outlet grid.
TROUBLESHOOTING
Problem
Cause
Solution
Motor does not run.
Plug inserted into the
mains outlet incorrectly or
insufficiently.
Check the plug connection.
The mains outlet is not live. Check for voltage, e.g. by connecting
another appliance.
Motor has stopped operating.
Improper or insufficient air
flow. Motor overheating
fuse activated.
Disconnect the cable from the socket.
Check and release the air suction
and discharge holes; check the filter’s
cleanliness and/or replace the dust bag.
Let the vacuum cleaner cool down.
Front cover cannot be closed
Dust bag inserted
incorrectly.
Check the dust filter installation.
Reduced suction power
Dust bag full or clogged.
Replace the dust bag.
Obstructed filter.
Clean or replace the filter.
Clogged nozzle, tube, or
hose.
Check and clear the air passage on the
suction and discharge sides.
Vacuum cleaner heats up
Slight heating of the vacuum cleaner is normal and cannot be considered
a failure.
OPTIONAL ACCESSORIES
The following appliance accessories can be purchased additionally:
Dust bags (5 units + 2 units of motor filters)
Order code NS9310 Price according to the valid price list
Motor filter
Order code 44291670 Price according to the valid price list
