Concept2 SVE 8090, Manual

Page: 65 / 80

REPAIR & MAINTENANCE
Bulb replacement
The bulb of the internal space lighting is special, with high thermal resistance (25 W, 300°C).
For the replacement proceed as follows:
• Pull out the power cord from the mains outlet or switch off the circuit breaker of the unit’s mains outlet.
• Unscrew the covering glass and replace the bulb with a new one of the same type.
• Screw the covering glass back in place.
WARNING!
The customer may only perform the bulb replacement. Any extensive maintenance or
repair that requires access
to the inner parts of the product must be performed by an expert service centre.
ENVIRONMENTAL PROTECTION
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags shall be handed over for recycling.
Appliance recycling at the end of its service life:
A symbol on the product or its packaging indicates that this product should not go into household
waste.
It must be taken to the collection point of an electric and electronic equipment recycling facility. By
making sure this product is disposed of properly, you will help prevent the negative eff ects on the en-
vironment and human health that would otherwise result from inappropriate disposal of this product.
You can learn more about recycling this product from your local authorities, a household waste disposal
service or in the shop where you bought this product.
63 SVK 8090
EN