Concept2 MNV3660, Manual

Page: 163 / 172

163
EN
MNV3660
Stains on cutlery
Used cutlery is not corrosion
resistant
The appliance was not
turned on after the salt was
added in the dishwasher.
Pieces of salt got in the
washing cycle
After adding salt,
always
run a quick wash cycle
without dishware loaded.
Loose cover of the softener
container
Check the softener container cover and make sure
it is properly tightened.
Knocking sound in the
interior of the appliance
during running washing
program
The lower or upper spray
arm is blocked by dishes or
food remains
Pause the program, check the arrangement of
dishes or rearrange the dishes and if necessary,
clean the spray arm.
Rattling sound in the interior
of the appliance during
running washing program
During the running washing
program Dishes move freely
inside the appliance
Pause the program and rearrange the dishes to
avoid spontaneous releasing of the dishes during
the washing program.
Knocking noise in water
pipes
It may be caused by the
cross-section of the pipes.
The knocking noise does not influence the
dishwasher. If you have doubts, consult it with
a qualified professional.
The detergent dispenser
cover cannot be closed
The dispenser is overfilled. Remove the excess amount of detergent.
The mechanism is blocked by
the detergent residues.
Clean the closing mechanism of the detergent
dispenser.
Dishes are dirty
The dishes were not
arranged properly
See "Loading dishware".
The selected washing
program was not strong
enough
Select more intensive washing program.
Insufficient amount of
detergent
Use more detergent.
The arm is blocked by dishes
or food remains.
Check the dishes and clean the spray arm if
needed.
It is possible the filter
is inserted improperly.
Blockage of the arms may
occur.
Clean or insert the filter properly. Clean the spray
arms (see "Cleaning the spray arms").
Stains on glass
Combination of soft water
and too much of detergents.
Use smaller amount of detergent and for washing
glasses select the shortest washing cycle if water
in your area is soft.
Black or grey stains on the
dishes
Aluminium cutlery has
touched the dishes during
the washing cycle.
Use a gentle abrasive agent to clean such stains.
Do not put this agent into the dishwasher!!!