166
EN
MNV3360
Cleaning the control panel and the surface of appliance
• Use only a soft damp cloth for cleaning.
• Do not use rough and sharp objects (e.g. steel wool) or aggressive detergents.
• Do not allow water to come in contact with the door lock of the appliance.
• To clean the control panel do not use a spray cleaner. It may cause damage to the door lock and electrical parts of
the appliance.
• Some paper towels can scratch the stainless steel of the control panel.
Cleaning the door of the appliance
• To clean the edges around the door, use only a soft damp cloth.
• Do not use any spray cleaners, they may damage the door lock and electrical parts of the appliance.
Frost protection
If you are not going to use the appliance for a longer period of time or to place the appliance in places with low
temperatures, it is necessary to follow these steps:
1. Unplug the appliance from the mains.
2. Close and disconnect the water inlet hose from the water supply.
3. Dismantle the inlet hose and drain water from the hose and the dishwasher. To capture the water, you can use
a shallow container e.g. basin.
4. Reconnect the inlet hose to the dishwasher.
5. Remove the filter system and drain/wipe the remaining water (using for example a sponge).
Note:
• If there is ice and the dishwasher cannot be turned on, contact the service centre.
Tips for maintaining
• After each washing cycle, close the water supply and leave the dishwasher door slightly open to prevent
accumulation of moisture and odour.
• Before cleaning and maintenance, disconnect the power cord from the wall outlet.
• Do not use any coarse (e.g. steel wool, rough part of sponges) and sharp objects or aggressive cleaning agents,
they may scratch the surface of the appliance.
• For cleaning use a damp cloth dipped in water and detergent.
• If you intend not using the dishwasher for a longer period of time, run a washing program without dishware.
After each washing cycle, disconnect the power cord from the wall outlet and leave the dishwasher door slightly
open to prevent accumulation of moisture and odour. Leaving the door slightly open prolongs the life of the seal.
• Keep the appliance in an upright position when manipulating. If this is not possible, lay the appliance and
transport it on its back.
• Deposits on the seal are one of the sources of odours. Clean the seal to prevent that.
