EN
26
KS3006
use.
• Keep the appliance clean; prevent foreign matter from entering the grille openings. It might damage the appliance,
cause a short circuit, or a fi re.
• Do not use abrasive or chemically aggressive substances to clean the appliance.
• Do not use the appliance if the power supply cable or the mains socket plug is damaged; have the defect repaired
immediately by an authorised service centre.
• Do not use the unit if it does not operate properly, if it has been dropped, damaged or submerged into liquid. Have
the appliance tested and repaired by an authorised service centre.
• Do not use the appliance outdoors.
• The appliance is intended for household use only, not for commercial use.
• Do not touch the appliance with wet hands.
• Do not submerge the supply cable, mains socket plug or the appliance in water or other liquids.
• Use only the supplied mounting kit when installing the appliance on a wall.
• The unit must not be used in any means of transport.
• Never repair the appliance yourself. Contact an authorised service centre.
Failure to follow the manufacturer‘s instructions may cause refusal of warranty repair.
PRODUCT DESCRIPTION
1. Air outlet grille
2. Carrying handle
3. Thermostat regulator
4. Mode selector
5. Ventilator switch
6. Air inlet grille
7. Legs (according to assembly type)
Accessories
A
Mounting kit for installation on a wall
A
2
6
3
5
4
7
1
EN
27
KS3006
a) Usage as a free-standing appliance
Before you start using the unit, attach the legs which increase its stability and enable the air to flow into the inlet grille.
1. Place the unit on a stable surface (e.g. table).
2. Attach the legs on the body.
3. Screw the legs firmly into the body (Fig. 1).
b) Usage when mounted on a wall
Before its first use, the appliance must be properly mounted on a wall in a way which ensures a sufficient airflow into
the inlet grille.
WARNING!
The appliance can only be installed on a wall made of inflammable material. No objects made of flammable material
may be placed above the appliance. The lateral and frontal distance from surrounding flammable materials must be at
least one meter. For detailed information and the minimum safe distance refer to Fig. 2.
Fig. 1
Fig. 2
ASSEMBLY
The unit must not be used without properly installed legs or proper installation on the wall.
EN
35
KS 3006
Summary of Contents for KS3006
Page 2: ......
