Concept2 IDV4430, Manual

Page: 87 / 98

87
EN
IDV4430
Switching OFF the cooking zone
1.
Press the cooking zone selection symbol (3) to activate it (the digit of the selected zone flashes).
2.
Press or slide your finger on the slider (2) to gradually adjust the power to 0.
Note:
•
After switching off the hob the “ H ” symbol can be displayed, which indicates that the used cooking zone is still hot
and there is a risk of serious burns.
• Symbol “ H ” disappears, when the used cooking zone cools down to a safe temperature (that is not too hot to touch).
• If the “ H ” symbol is light up on the control panel, it is possible to use the residual heat e.g. for heating up another
cookware.
Switching OFF the hob
•
By pressing the ON/OFF button (5) you can turn off the induction hob. All the settings will be reset.
• After switching off the hob the “ H ”, symbol can be displayed, which indicates that some of the used cooking zones
are still hot and there is a risk of serious burns. Never touch these cooking zones!
Note:
•
If all the cooking zones will be switched off and within 1 minute the control panel will not be touched the induction
hob will switch off automatically.
•
For safety reasons, the automatic switch off (cooking time) on individual cooking zones is limited to 8 hours (power
level 1–3), 4 hours (power level 4–6) or 2 hours (power level 7–9).
• The induction hob deactivates automatically even when any cooking zone does not detect any cookware after
2 minutes.
ADVANCED FEATURES
POWERBOOST function
1. Touch the ON/OFF symbol (5) for 3 seconds to activate the hob.
2. Press the cooking zone selection symbol (3) to activate it (the digit of the selected zone flashes).
3. By pressing the button (4) you activate the POWERBOOST function and the “
P. ” symbol will be displayed on the
control panel, which signals that the selected cooking zone is set to maximum power.
4. To cancel the POWERBOOST function, press the button (4). The cooking zone will be set to the power level it was
set before activating the POWERBOOST function.
5. Press the Powerbooster symbol (4) or press / drag your finger on the slider (2) to deactivate the Powerbooster
function. The letter “b” disappears from the display. The Powerbooster function is thus deactivated.
Note:
•
The POWERBOOST function can be used at any cooking zone.
• If there is no change in the selected cooking zone within 5 minutes of activating the POWERBOOST function, the
cooking zone will be set to the power level at which it was set before activating the POWERBOOST function.
• In case the power level of the selected cooking zone was set to “ 0 ” before activating the POWERBOOST function,
the power level of the cooking zone will be set to “
9
” within 5 minutes of no activity.
Child lock function
This function prevents unwanted operation of the hob.
1. To lock the control panel, press and hold the plus and minus buttons for a few seconds.
2. The “
Lo ” (Lock) symbol will be displayed on the control panel, which symbolises that the control panel is locked.
Thus, the control panel of the hob is locked except for the ON/OFF symbol (5), which is deactivated.
3. For unlocking the control panel press and hold the symbol for activation/deactivation of the child lock (5) until the
acoustic sound goes off.
4. The “ Lo ” symbol disappears and the control panel is active again.