55
EN
IDV2460
Cleaning of the heating plate
Clean the heating plate after each cooking session. It will prevent the remains of food from burning during the next
cooking session.
For the removal of food remains and the layer of grease use a glass scraper.
For cleaning the lukewarm heating plate use a cleaning agent and a paper towel. If the plate was cleaned hot, stains
could appear on it.
Then wipe the plate with a damp cloth and wipe it dry using a soft cloth.
Cleaners
Use cleaners suitable for glass-ceramic surfaces, e.g. CERA CLEN, Cera-fix, Sidol for ceran+steel.
Water stains can also be removed by means of lemon or vinegar.
Unsuitable cleaners
Never use:
Coarse sponges, abrasive agents or aggressive cleaners such as the spray for cleaning ovens and stain remover.
Scraper for glass
Tough dirt shall be removed preferably by means of a glass scraper.
Release the scraper.
Clean the heating plate with the edge only.
The holder of the scraper could scratch it.
WARNING!
The scraper is very sharp. Danger of injury! After cleaning, secure the scraper again.
If the edge is damaged, release it immediately.
Metallic-gloss colouring
Metallic-gloss colouring appears after the use of unsuitable cleaners or abrasion of a cooking utensil bottom.
Its removal is very difficult. Use Stahl-Fix or Sidol for ceran+steel. Removal of this colouring in our service centres is
charged.
Control panel
Make sure the control panel is kept clean and dry.
Remains of food and overboiled food negatively affect its function.
Cleaning of the heating plate frame (model IDV 5560 only)
Use only warm soap solution.
Do not use any sharp or coarse means. The glass scraper is not suitable, the frame could get damaged.
Lemon and vinegar are not suitable for cleaning of the heating plate frame. Matt areas could appear on it.
UNIT INSTALLATION
• Only the customer is responsible for installation in situ. Defects caused by incorrect installation are not covered by the
warranty.
• The manufacturer bears no responsibility for damage caused to people, animals or objects as a result of incorrect
installation.