11
MAINTENANCE
WARNING:
The safety level of the machine can be maintained only if it is examined regularly for damage
and wear. Replace defective components immediately to ensure safety and performance or keep machine out of
use until repair.
2.
Inspect drive cord for wear. The drive cord is a single
cord that is connected to the handle on one end
and the foot carriage on the other end. Inspect the
entire length of the drive cord for wear, including the
section that is inside the shuttle channel, by pulling
the handle all the way out.
Every 50 Hours of Use
Weekly for Institutional Users:
1.
Lubricate the chain with a teaspoon of purified mineral
oil, 3-IN-ONE® oil, or 20W motor oil. Apply oil to a paper
towel, and rub the paper towel along entire length of chain.
Wipe off the excess. Repeat if needed. Do not clean the
chain with any kind of cleaner or solvent, e.g. WD-40
®
.
Daily
Wipe seat and rail assembly
clean with a cloth or non-
abrasive scouring pad after
use. Do not use mineral acids,
bleach or coarse abrasives.
IMPORTANT:
To ensure the
quality feel of the foot carriage
rollers on the rail assembly, it
is vital that this area be cleaned
on both sides of monorail
after every use. If this area is
not cleaned regularly, the foot
stretcher movement will feel
bumpy and rough.
New cord.
Acceptable wear.
Still usable.
Excessive wear.
Replace cord.
DYN
AMI
C
pat
en
t p
en
din
g
| c
on
cep
t2
.co
m
pull handle out
RECOMMENDED MAINTENANCE SCHEDULE
1
2
On a Regular Basis
Firmware is the internal software that runs your Performance Monitor. Your PM comes pre-installed with the latest
firmware, however, new and improved versions are offered regularly. We offer free software called the Concept2
Utility that makes it easy to update your PM with the latest firmware version at any time.
Visit concept2.com/pm5firmware for more information.
PM5 Menu Map
(Visit
concept2.com/PM5
for more information.)
Summary of Contents for Dynamic Indoor Rower
Page 1: ...PRODUCT MANUAL dynamic indoor rower...
Page 2: ...2...
