UK
47
BLOWING
!
Attach the blowing adapter; open the rear
port by pulling the upper indent, see Fig. 1.
!
Insert the multi-purpose adapter into
the opening, see Fig. 2.
!
Put the inflating adapter on the hose so the loop fits in the opening in the hose.
!
Press the adapter in the direction of arrow until it snaps in.
!
During inflating, you can adjust the air stream and pressure by blocking the hole by
your thumb.
Note: Before inflating, make sure that the flexible hose is clean.
Warning:
!
Do not block the hole by thumb permanently,
!
NEVER EXCEED THE RECOMMENDED PRESSURE
. The inflated object may
burst and cause injury. No maximum pressure is indicated on soft inflating objects.
Be careful and do not over-inflate them.
!
BEFORE ANY MAINTENANCE, DISCONNECT THE VACUUM CLEANER FROM
MAINS.
VP 1000
1
2
Fig. 1
Fig. 2
