Clean the inner and outer surfaces and door sealing with a wet cloth. You can use a liquid cleaning agent.
Do not use sponges, steel wool, abrasive cleaners or solvents (gasoline, thinners, etc.). You might damage the
protective layer.
You can remove odours from the inside by pouring lemon juice and the skin from a lemon into a microwave
bowl filled with water, and leaving the bowl for 5 minutes in the oven while operating. Dry the inside with
a soft cloth afterwards.
If you need to replace the inner light bulb, contact the distributor.
If you do not keep the unit clean, the surfaces may be damaged, which may lead to a shorter service life and
dangerous situations.
ASSEMBLY ANd INSTALLATIoN
The unit is designed to be in-built in a kitchen set.
The supply cord plug has to be freely accessible even
after the installation of the unit!
WARNING!
Install the unit at a maximum height of 85 cm.
The in-built box should not have a back side, for cooling
and ventilation purposes.
Keep the minimum dimension of the ventilation hole in
the back upper part in the whole width. If there is anoth-
er box placed above the unit, the ventilation should be
arranged for this as well. A so-called ventilation chimney
will be created.
dimensions of the box
Box dimensions for built-in version of the unit, see Fig. 1.
Mounting Accessories
1 pc Front mounting screw
1 pc Fixing plate
2 pcs Plate fixing screw
600
560 + 8
(45)
(45)
min.
500
380 +2
Fig. 1
Fig. 2
EN
58
MTV 6925WH | MTV 6925BC
