Concept Pro AIR3016, User Manual

Page: 8 / 14

ON SCREEN DISPLAY (OSD) (AIR3026HG MODEL ONLY)
The power indicator LEDs display the power supply being fed into the camera and whether it
is too high, low or correct.
1. "PO": Red LED - Voltage is too high
2. "PN": Green LED - Voltage is correct
3. "PL": Yellow LED - Voltage is too low
4. Extra video out and OSD control connector - Attach your Video test monitor with the
service video cable enclosed in your camera box. The camera footage will appear on your
test monitor and zoom/focus adjustments can be carried out as the installation requires.
1) Press “U” to navigate upwards
2) Press “D” to navigate downwards
3) Press “L” to navigate left
4) Press “R” to navigate right
5) Press “ENT” to open menu/sub-menu
The Service Video Out panel contains a power indicator and test monitor connection for
ease of adjusting the camera settings during installation.
PO PN
VIDEO
PL
1 2 3
4
TEST MONITOR
OSD OUTPUT CABLE L
U D
R
ENT
OSD Controller
L
U
D
R
ENT
AIR3026HG