improper installation can result in injury.
Be sure to complete all rigging and installation procedures before connecting the main
power cord to the appropriate wall outlet.
Clamp Mounting: The Pixel Bar Light provides a unique mounting bracket assembly
that integrates the bottom of the base and the safety cable rigging point in one unit.
For additional safety be sure to attach at least one properly rated safety cable to the
fixture using one of the safety cable rigging point integrated in the base assembly.
Regardless of the rigging option you choose for your Pixel Bar Light, always be sure
to only use the designated rigging point for the safety cable and never secure a safety
cable to a carrying handle.
DMX-512 control connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller
and the other side to the male 3-pin XLR input the Pixel Bar Light. You can chain
multiple bar lights together through serial linking. The cable needed should be two
core screened cable with XLR input and output connectors. Please refer to the
diagram below.
DMX-512 connection with DMX terminator.
For installation where the DMX cable has to run a long distance or is in an electrically
noisy environment, such as in a discotheque, it is recommended to use a DMX
terminator. This helps in preventing corruption of the digital control signal by
electrical noise. The DMX terminator is simply an XLR plug with a 120Ω resistor
connected between pins 2 and 3, which is then plugged into the output XLR socket of
