5. Feeding systems / Capacities
Depending on the application a different feeding system might be needed.
Use the following table to determine roughly the best system for the application. For more detailed information
please contact a Conair representative.
Feeding system
Pellet
materials
Regrind/hard-to-
flow materials
Accuracy
Feeding capacity
†
Gram/sec.
Feeding capacity
†
Kg/hour
GLX
YES
No
++
0.01 to 1.1
0.05 to 4.1
GX YES No
+
0.1 to 5.0
0.5 to 12.6
HX
‡
NO
No
++
0.007 to 0.4
0.03 to 1.3
A-20LT
YES
No
+/-
0.4 to 14.0
1.3 to 50.4
A-20HT*
YES
YES
+/-
0.4 to 14.0
1.3 to 50.4
A-30HT*
YES
YES
+/-
1.4 to 35.0
5.0 to 126.0
Note *
Used for regrind and irregular shaped materials.
Note
†
Feed rates are based on materials with a bulk density of 35 lb/ft
3
.
Note
‡
For granular/free-flowing powder.
Which type of feeding system do I need with which throat adaptor?
The last 3 numbers are related to the length of the feeding system.
TYPE
CODE FOR STANDARD THROAT
ADAPTOR
CODE FOR WATER-COOLED THROAT
ADAPTOR
GLX GLX
GLXC
GX GX
GXC
HX HX
HXC
A20LT A20
A20C
A20HT A20HT
A20HTC
NOTE:
The “C” suffix for the water-cooled throat adapters symbolize a longer dispensing cylinder.
Front side view
GLX
Back side view
A20LT
A20HT
A30HT
GX
HX
6 Dual Feed TrueFeed Manual
Summary of Contents for TrueFeed
Page 4: ......
Page 41: ...APPENDIX A TrueFeed Print view INSIDE VIEW OF THE CABINET 37 Dual Feed TrueFeed Manual...
Page 42: ...APPENDIX B TrueFeed Wiring diagram 38 Dual Feed TrueFeed Manual Only with Dual TrueFeed...
Page 44: ...APPENDIX D TrueFeed General Dimensions 40 Dual Feed TrueFeed Manual...