background image

FER À VAPEUR NUMÉRIQUE

®

Guide d’utilisation

3 options de température DEL

Afin que votre appareil vous procure en toute sécurité 

des années de satisfaction, lisez toujours soigneusement 

le guide d’utilisation avant de l’utiliser. 

SÉRIES DPP1500C

LIMITED ONE YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for

12 months from the date of purchase if the appliance is defective in 

workmanship or materials.

To obtain service under this warranty, return the defective product to the

service centre listed below together with your purchase receipt and $7.50

for postage and handling. In the absence of a purchase receipt, the 

warranty period shall be 12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE 12
MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. 

This warranty gives you specific legal rights, and you may also have other

rights, which vary from province to province. 

Service Centers:
CONAIR CONSUMER PRODUCTS INC.

156 Parkshore Drive,

Brampton, Ontario

L6T 5M1

1-800-472-7606

©2005 CONAIR CONSUMER PRODUCTS INC.
www.conaircanada.ca

05CN1260

IB-5866

DPP1500C IB-5866.qxd  11/26/05  9:58 AM  Page 12

Summary of Contents for DPP1500C SERIES








Reviews: