background image

Clothing Iron Unique Features

This iron has been designed with some new features
not previously available on steam irons. Please take
some time to familiarize yourself with them:

Electronic OneTouch™ Control

This control system provides precision temperature control to greatly

improve fabric-pressing performance.

On/Off Button: Powers the appliance On or Off. Also used to activate Crafters

Setting. 

Heat Selector Buttons: Use to select the heat setting. After plugging the iron in, touch

one of these buttons to automatically heat the iron to the correct temperature for that set-
ting. The three settings correspond to internationally accepted temperatures for a range
of fabrics. These symbols may be found on the fabric care label of your garment.

One Dot (Low): Acrylic-Nylon
Two Dots (Medium) : Silk, Rayon, Polyester
Three Dots (High): Wool, Cotton and Linen

Auto Off Indicator: Lights blink when iron has not been moved and the heater has

shut down. This indicator will blink when iron is in Crafter’s Setting (heel rest/auto 
shutoff bypass).

SolSoleplate Ready Indicator: Illuminates when iron has reached set temperature 
to safely press your fabric.

Steam Ready Indicator: Illuminates when the iron has reached the correct temperature

to produce steam without dripping.

4-way Automatic Shutoff

This iron will shut down if left motionless on its heel, on its side, face

down or if dropped. The iron will beep three times. If dropped, the

iron will continuously beep and the display will flash. Unplug, and

inspect for damage. Discontinue use if damage is detected.

1

2

3

4

5

Thanks for your purchase of the Conair Digital Steam Iron. 

We have used the highest quality materials in the production of this

precision appliance to ensure long-lasting performance. 

Please be sure to read the following instructions carefully before

you use your Conair Digital Steam Iron for the first time. Once you

have familiarized yourself with this appliance, please save this

instruction manual for future reference.

Getting To know your Digital Steam Iron

Oversized soleplate covers

more fabric. Curved nose gets

between buttons

Water tank

Power Cord

Variable Steam adjusts

steam output to your

ironing needs.
Self Clean setting uses

powerful steam burst to

clean out steam cham-

ber and improve per-

formance.

Water spray

control

Burst of Steam

control

Water tank

release button

5

2

3

4

1

/

10 minutes

30 seconds

30 seconds

Instant

DPP1500C IB-5866.qxd  11/26/05  9:58 AM  Page 4

Summary of Contents for DPP1500C SERIES








Reviews: