![background image](http://html1.mh-extra.com/html/conair/basic-32-loader-control-b32/basic-32-loader-control-b32_user-manual_2649052017.webp)
UGC007/0702
Basic 32 Loader Control
I
NSTALLATION
3-5
The B32 Input/Output enclosure should be
mounted on a wall, or other secure vertical
surface, at a height providing easy access
and a clear view of the touchscreen panel.
Bolt the control to the
mounting surface. Use the mounting
brackets on the I/O enclosure.
Ground the control enclosure.
Connect a ground wire to the control. Follow procedures
outlined by your regional electrical codes and the wiring
diagrams included with this manual.
M
OUNTING
THE
C
ONTROL
1
2
WARNING: Improper installation may
result in equipment damage or personal
injury.
●
Always maintain a safe ground. Follow the safe
grounding procedures in the wiring diagram pack-
age. Ground the shielded cable inside the
Input/Output enclosure only.
●
Do not operate the equipment at power levels other
than those specified on the the equipment data
plate.
Summary of Contents for Basic 32 Loader Control B32
Page 8: ......
Page 35: ...5 1 UGC007 0702 Basic 32 Loader Control l Maintenance checklist 5 2 MAINTENANCE...
Page 46: ......
Page 50: ......