4
Step 5: Position the step.
Slide the Step Gate assembly
into the channel as shown.
Step 6: Tighten the outer grub screws.
Position the Gate Step in the
required position. Using a 4mm
allen tool, tighten the two outer
grub screws within the mounts.
The bottom ‘c’ chan-
nel is to be used
during install.
Step 4: Insert the step into the Sport Utility Bed
(SUB
©
)
.
Drop the side gate of the
Comtruk Sport Utility Bed
(SUB) or Tri-Gate Bed, that
you intend to install the Gate
Step to. Locate the ‘c’ channel
access at the bottom of the
hanging gate (closest to the
ground).