45
Choose
Add
or
Remove
to configure MAC filtering rules. The following screen will
appear when you click
Add
. Create a filter to identify the MAC layer frames by
specifying at least one condition below. If multiple conditions are specified, all of
them must be met. Click
Save/Apply
to save and activate the filter rule.
Consult the table below for detailed field descriptions.
Field
Description
Protocol Type
PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP
Destination MAC Address Defines the destination MAC address
Source MAC Address
Defines the source MAC address
Frame Direction
Select the incoming/outgoing packet interface
WAN Interfaces
Applies the filter to selected bridge PVCs. These
rules are arranged according to bridge PVC, as shown
under the VPI/VCI heading on the previous screen.
