37
6.2
LAN
From this screen, LAN interface settings can be configured.
NOTE:
NAT is enabled so
UPnP
is shown above (see underlined notes below).
Consult the field descriptions below for more details.
IP Address:
Enter the IP address for the LAN port.
Subnet Mask:
Enter the subnet mask for the LAN port.
Enable UPnP:
Tick the box to enable Universal Plug and Play.
This option is hidden when NAT disabled or if no PVC exists
Enable IGMP Snooping:
This function does not apply to this model.
DHCP Server:
To enable DHCP, select
Enable DHCP server
and enter starting
and ending IP addresses and the leased time. This setting
configures the router to automatically assign IP, default gateway
and DNS server addresses to every PC on your LAN.
DHCP Server Relay:
Enable with checkbox
;
and enter DHCP Server IP address.
This allows the Router to relay the DHCP packets to the
remote DHCP server. The remote DHCP server will provide
the IP address.
This option is hidden if NAT is enabled
To configure a secondary IP address, tick the checkbox
;
outlined (in
RED
) below.
