13
4.2
Manual Quick Setup
STEP 1:
Click
Quick Setup
and un-tick the
DSL Auto-connect
checkbox
;
to
enable manual configuration of the connection type.
STEP 2:
Adjust the VPI/VCI settings for the connection you wish to establish. You
may also
Enable Quality of Service
(QoS) with its checkbox
;
.
STEP 3:
On this screen, you can choose the connection type and select the
appropriate encapsulation mode. The available options are shown.
PPPoA- VC/MUX, LLC/ENCAPSULATION
PPPoE- LLC/SNAP BRIDGING, VC/MUX
MER- LLC/SNAP-BRIDGING, VC/MUX
IPoA- LLC/SNAP-ROUTING, VC MUX
Bridging- LLC/SNAP-BRIDGING, VC/MUX
You may also choose to
Enable 802.1q
(available in PPPoE, MER and
Bridging modes) and enter the VLAN ID, as shown below.
Un-tick this checkbox to enable manual
setup and display the following screen.
