Comtrend Corporation CT-5071T User Manual Download Page 69

Page: 69 / 79

Before enabling

Access Control Mode

, configure the IP addresses by clicking the

Add

button. Enter the IP address and subnet mask, and select an interface. Click

Save/Apply

to add this IP address to the access control list.

8.6.3

Passwords

This screen is used to configure the user account access passwords for the device.

Access to the CT-5071T is controlled through the following three user accounts:

•

root

- this has unrestricted access to change and view the configuration.

•

support

- used for remote maintenance and diagnostics of the router

•

user

- this has limited access. This account can view configuration settings and

statistics, as well as, update the router firmware.

Use the fields below to change password settings. Click

Save/Apply

to continue.

Summary of Contents for CT-5071T
















































































Search results

Summary of Contents for CT-5071T

Reviews:

Related manuals for CT-5071T

Brands by name

Popular brands

Comtrend Corporation CT-5071T, User Manual

Search results

Summary of Contents for CT-5071T

Reviews:

Related manuals for CT-5071T

Brands by name

Popular brands