Comtrend Corporation CT-5071T User Manual Download Page 66

Page: 66 / 79

8.3

SNMP Agent

Simple Network Management Protocol (SNMP) allows a management application to
retrieve statistics and status from the SNMP agent in this device. Select the

Enable

radio button, configure options, and click

Save/Apply

to activate SNMP.

8.4

TR-069 Client

WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to

perform auto-configuration, provision, collection, and diagnostics to this device.

Option

Description

Inform

Disable/Enable TR-069 client on the CPE.

Inform Interval

The duration in seconds of the interval for which the CPE

MUST attempt to connect with the ACS and call the Inform
method.

ACS URL

URL for the CPE to connect to the ACS using the CPE WAN
Management Protocol. This parameter MUST be in the form

Summary of Contents for CT-5071T
















































































Search results

Summary of Contents for CT-5071T

Reviews:

Related manuals for CT-5071T

Brands by name

Popular brands

Comtrend Corporation CT-5071T, User Manual

Search results

Summary of Contents for CT-5071T

Reviews:

Related manuals for CT-5071T

Brands by name

Popular brands