51
Source MAC Address
A packet belongs to SET-1, if a binary-AND of
its source MAC address with the Source MAC
Mask is equal to the binary-AND of the Source
MAC Mask and this field.
Source MAC Mask
This is the mask used to decide how many
bits are checked in Source MAC Address.
Destination MAC Address
A packet belongs to SET-1 then the result
that the Destination MAC Address of its
header binary-AND to the Destination MAC
Mask must equal to the result that this field
binary-AND to the Destination MAC Mask.
Destination MAC Mask
This is the mask used to decide how many
bits are checked in Destination MAC Address.
6.6
Routing
This option allows for
Default Gateway,
Static Route,
and
RIP
configuration.
NOTE:
In bridge mode, the
RIP
screen is hidden while the
Default Gateway
and
Static Route
configuration screens are shown but ineffective.
6.6.1
Default Gateway
If the
Enable Automatic Assigned Default Gateway
checkbox
;
is selected, the
router will accept the first received default gateway assignment from one of the
PPPoA, PPPoE or MER (DHCP enabled) PVC(s). If the checkbox
;
is not selected,
enter the static default gateway AND/OR a WAN interface. Click
Save/Apply.
NOTE:
After enabling the Automatic Assigned Default Gateway, the device must
be rebooted to activate the assigned default gateway.
