Comtrend Corporation AR-5389, User Manual

Page: 152 / 178

151
There are many settings that can be configured here including:
DSL Latency, PTM Priority, Connection Mode and Quality of Service.
STEP 6: Click Apply/Save to confirm your choices.
On the next screen, check that the PTM interface is added to the list.
For example, an PTM interface in Default Mode is shown below.
To add a WAN connection go to
E2 ~ WAN Connections .
E1.3 Ethernet WAN Interface
Some models of the AR-5389 support a single Ethernet WAN interface over the ETH
WAN port. Follow these procedures to configure an Ethernet WAN interface.
NOTE:
To add WAN connections to one interface type, you must delete existing
connections from the other interface type using the remove button.