MNC-0500-026
24 of 32
Revision M
Amplifier Communication and Protocol, Rabbit CPU
GoTo Power (dBW)
Command Byte:
‘D’
Function:
The HPA seeks the specified power level for 10 seconds.
Parameter:
The desired power level in “XX.X” dBW.
Compatibility:
Attenuator required.
GoTo Power (Watts)
Command Byte:
‘E’
Function:
The HPA seeks the specified power level for 10 seconds.
Parameter:
The desired power level in “XXXX” Watts.
Compatibility:
Attenuator required.
Optional Parameter:
“M” - desired power in dBm.
Example:
EMxx.x
Heater Standby
Command Byte:
‘:’
Function:
Enables/Disables Heater Standby mode.
Parameters:
‘0’ - Disable Heater Standby.
‘1’ - Enable Heater Standby.
High RF Trip
Command Byte:
‘M’
Function:
Sets a High RF trip point. If output power exceeds the set point, an
alarm or fault is generated provided the HPA has processed an “Enable RF
Limits” command (R’).
Parameter:
“AXXXX” to set an Alarm trip point,
“FXXXX” to set a Fault trip point, “D” to disable. XXXX is the desired trip point
in Watts.
Optional Parameter:
“M” - desired power in dBm.
Example: MAMxx.x
EAR EXPORT CONTROLLED: The information contained in this Manual refers or relates to a product that is subject
to the U.S. Export Administration Regulations (EAR). Transfer of data herein by any means to a Foreign Person,
whether in the U.S. or abroad, may require an export license from the U.S. Department of Commerce.
