Comtech EF Data SLM-5650B, Installation And Operation Manual

Page: 174 / 412

SLM-5650B Satellite Modem
Revision 2
Network Processor (NP) Interface 8–8 MN-SLM-5650B
When the modem is operating in (Static) Bridge Mode, Ethernet communication between the Base
Modem and the NP Interface is disabled, as the Base Modem does not support secure network
management interfaces.
8.6.3 User Login
Access to the modem’s NP HTTP/HTTPS Interface depends on the IP Interface Security Mode
setting selected for the interface (via the
Admin | Security page – see Section 8.6.5.2.3 for more
information).
From any compatible Web browser, enter the NP Interface IP Address into the browser’s Address
area as follows (where “ xxx.xxx.xxx.xxx ” represents the IP Address of the NP Interface):
Figure 8-4. Web Browser Address Line
For non-secure HTTP session (Low Level Security selected) – http:// xxx.xxx.xxx.xxx;
For secure HTTPS session (High Level Security selected) – https:// xxx.xxx.xxx.xxx.
Figure 8-5. Password Screen
When prompted, type in a valid User Name and Password, similar to the dialog box shown to the
right. The default for both is
comtech . Click [OK] to continue.
Note: The NP Interface User Name and Password are each restricted to a minimum of 7 characters
and a maximum of 25 characters, excluding < (ASCII Code 60), > (ASCII Code 62), “ (ASCII Code
34), and ~ (ASCII Code 126).