Comtech EF Data SLM-5650B, Installation And Operation Manual

Page: 127 / 412

SLM-5650B Satellite Modem
Revision 2
Front Panel Operation 5–43 MN-SLM-5650B
5.2.7.5 Utility: Temp
Modem Temp (Deg C): RF=+38 PS=+40
M&C=+43 Mod=+46/+36 Demod=+46/+38 (E)
This read-only screen allows the user to view the modem internal temperatures (RF, PS,
M&C, Mod and Demod).
5.2.7.6 Utility: AGC
AgcMan: Min Value: 00.0 Volts
Max Value: 10.0 Volts (

E)
Use the

arrow keys to select, and then set the Minimum and Maximum voltage levels for
the external AGC monitor voltage that is available on the AUX connector.
Option Setting
Min Value
Specifies the voltage to output on the External AGC voltage signal when the demodulator RSL
is at its minimum level.
Max Value Specifies the voltage to output when the demodulator RSL is at its maximum level.
5.2.7.7 Utility: Alarm
Audible Alarm: Disable
(

E)
Use the

arrow keys to either Disable or Enable the alarm, and then press [ENT] .
5.2.7.8 Utility: Firmware
Firmware Images: Information
Select (

E)
Use the

arrow keys to select Information or Select, and then press [ENT] .
Item Description
Information View information on the firmware residing in the Bootrom, Image#1, or Image#2 slots.
Select Select which image (Active Image) will be loaded into the modem: #1 or #2.
Utility: Firmware

Information
Firmware Info: Bootrom Image#1
Image#2 (

E)
Use the

arrow keys to select Bootrom , Image#1 , or Image#2 to view information on
the firmware and software used by the modem.