PCB-4000A 1+1 Phase Combiner
Revision 2
Ethernet-based Remote Product Management
6–1
MN-PCB-4000A
Chapter 6. ETHERNET-BASED
REMOTE PRODUCT
MANAGEMENT
6.1
Overview
Ethernet-based Remote Product Management is available using the
SYSTEM COM | J1
connector.
PROCEED WITH ETHERNET-BASED REMOTE PRODUCT MANAGEMENT ASSUMING
THAT:
•
The PCB-4000A is operating with the latest version firmware files.
•
The PCB-4000A is connected to a user-supplied, Windows-based PC, and:
o
The PC Ethernet port is connected to the PCB-4000A SYSTEM COM | J1
connector.
6.2
Ethernet Management Interface Protocols
The user PC facilitates access to Ethernet-based remote monitor and control (M&C) of the
PCB-4000A through the Simple Network Management Protocol (SNMP
).
This
non-secure
interface
requires a user-supplied Network Management System (NMS) and a user-supplied
Management Information Base (MIB) File Browser.
SNMP user interface is only available when the unit’s Local/Remote state is set to Ethernet
Remote through LRS serial remote command (LRS=3).
6.3
SNMP Interface
The SNMP is an Internet-standard protocol for managing devices on IP networks. An SNMP
managed network consists of three key components:
•
The managed device.
This includes the PCB-4000A.
•
The SNMP Agent.
The software that runs on the PCB-4000A. The SNMP Agent
supports both
SNMPv1
and
SNMPv2c
.
•
The user-supplied NMS.
The software that runs on the manager.
Summary of Contents for PCB-4000A
Page 28: ...PCB 4000A 1 1 Phase Combiner Revision 2 External Connectors 2 8 MN PCB 4000A Notes...
Page 70: ...PCB 4000A 1 1 Phase Combiner Revision 2 Assembly Kits A 4 MN PCB 4000A BLANK PAGE...
Page 87: ......
Page 88: ...2114 WEST 7TH STREET TEMPE ARIZONA 85281 USA 480 333 2200 PHONE 480 333 2161 FAX...
