Comtech EF Data PCB-4000A, Installation And Operation Manual

Page: 47 / 88

PCB-4000A 1+1 Phase Combiner
Revision 2
Updating Firmware 4–7 MN-PCB-4000A
Figure 4-6. Download Firmware Archive File
2. Extract the firmware files from the archive file.
a. (If not already done with File Download > [Open] ) Extract the firmware files from the
downloaded *.exe or *.zip archive file with the user-supplied utility program:
b. Double-click on the archive file name, and then follow the prompts provided by the user-
supplied utility program. Extract, at a minimum, four files:
•
FW-0021045*_Bulk_v*_*_*.zip, where “*_*_*” is the version (bulk image file).
•
FW10874-2-.mib (Comtech EF Data MIB file)
•
FW-0021047*.mib (PCB-4X00A MIB file), where “*” is the revision.
•
PCB-4X00A_ReleaseNotes_v*_*_*.doc, where “*” is the version (release notes).
3. Confirm availability of the firmware files in the temporary folder.
There are several ways you may view the contents of the temporary folder on a Windows-
based PC.
a. From the Windows Desktop:
•
Double-left-click the “ temp” folder saved to the Windows Desktop.
•
Use Windows Explorer to locate, and then double-left-click the “ temp ” folder.
•
Use the ‘Browse’ window ( [Start] > ...Run > [Browse] ) to locate, and then double-
click the “ c:\temp ” folder.
b. Using Command-line:
•
Type “ cd c:\temp ” at the Command-line prompt to change to the temporary directory
created earlier using Command-line.
•
Type “ dir ” to list the files extracted to the temporary directory from the downloaded
archive file.
The firmware files have been successfully downloaded and are now
available for transfer to the PCB-4000A.