Comtech EF Data PCB-4000A, Installation And Operation Manual

Page: 45 / 88

PCB-4000A 1+1 Phase Combiner
Revision 2
Updating Firmware 4–5 MN-PCB-4000A
d. Use Windows Command-line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the ‘ Run... ’ icon (or,
depending on Windows OS versions prior to Windows 95, click the ‘ MS-DOS
Prompt ’ icon from the Main Menu).
•
Next, open a Command-line window…
o
For Windows 95 or Windows 98 – Type “ command ”.
o
For any Windows OS versions later than Windows 98 – Type “ cmd ” or
“ command ”.
o
Alternately, from [Start] , select All Programs > Accessories > Command
Prompt .
o
Finally, from the Command-line ‘ c:\>’ prompt, type “ mkdir temp ” or “ md temp ”
( mkdir and md stand for make directory ), and then click [OK] .
Figure 4-5. Temporary Folder Setup using Windows Command Line
There should now be a "temp" folder created and available for placement of the firmware file
download.