Comtech EF Data MBT-4000B User'S Installation And Operation Manual Download Page 48

Page: 48 / 86

MBT-4000B Multi-band Transceiver System

Revision 1

Updating Firmware

/MBT4000B.IOM

5–10

Step Task

Before proceeding, the

MBT-4000B system must be

powered off. Disconnect the power

cable from the Base Module, and

then click [Start Upload] to resume

the upload process.

When prompted, reconnect the

power cable to the Base Module.

Once the User PC establishes

communication with the

MBT-4000B, the upload takes

place – do not interrupt this

upload process.

Note: If the upload is not

successful for any reason – e.g.,

the communications cable is

disconnected, the wrong COM

port is specified, the upload was

inadvertently interrupted, etc. –

you may troubleshoot the setup as

needed, and then click [Repeat

Upload] or [Go Back to Start] to

resume or retry the process.

Summary of Contents for MBT-4000B






















































































Search results

Summary of Contents for MBT-4000B

Reviews:

Comtech EF Data MBT-4000B, User'S Installation And Operation Manual, Page: 48 / 86

Search results

Summary of Contents for MBT-4000B

Reviews: