Comtech EF Data CDM-740, Installation And Operation Manual

Page: 68 / 150

CDM-740 Advanced Satellite Modem Revision 0
Front Panel Operation MN-CDM740
5–16
5.4.5.1 (CONFIG:) IP
Æ
(GE1 / GE2 / MGMT)
GE1: Addr/Range MAC Gateway
Link-Config NegoSpeed
(
◄►
)
GE2: Addr/Range MAC Gateway
Link-Config NegoSpeed
(
◄►
)
MANAGEMENT: Addr/Range MAC Gateway
Link-Config NegoSpeed
(
◄►
)
Select
Addr/Range
,
MAC
,
Gateway
,
Link-Config
, or
NegoSpeed
using the
◄ ►
arrow keys,
then press
ENTER
.
(CONFIG:) IP Æ (GE1 / GE2 / MGMT) Æ Addr/Range
[HEADER] Ethernet IP Address/Range:
192.168.001.002/24
(
◄►
E)
Where [HEADER] is GE1, GE2, or MANAGEMENT:
To configure the IP Address for the
Ethernet M&C port for this interface, use the
◄ ►
arrow keys to select the character to edit, then
the
▲ ▼
arrow keys to edit the value of that digit. Press
ENTER
when done.
(CONFIG:) IP Æ (GE1 / GE2 / MGMT) Æ MAC
[HEADER] Ethernet MAC Address (Read-Only)
00-06-B0-00-01-06
(
◄►
E)
Where [HEADER] is GE1, GE2, or MANAGEMENT:
This is a ‘status only’ display showing the
interface MAC address. Exit this
read-only
screen by pressing
ENTER
or
CLEAR.
(CONFIG:) IP Æ (GE1 / GE2 / MGMT) Æ Gateway
[HEADER] Ethernet IP Gateway:
192.168.001.002
(
◄►
E)
Where [HEADER] is GE1, GE2, or MANAGEMENT:
To edit the IP Gateway Address for the
Ethernet M&C port for this interface, use the
◄ ►
arrow keys to select the character to edit, then
use the
▲ ▼
arrow keys to edit the value of that digit. Press
ENTER
when done.
(CONFIG:) IP Æ (GE1 / GE2 / MGMT) Æ Link-Config
[HEADER] Link Configuration:
Auto 1000F 100F 100H 10F 10H
(
◄►
E)
Where [HEADER] is GE1, GE2, or MANAGEMENT:
To configure the line speed and duplex
setting for this interface, use the
◄ ►
arrow keys to select the configuration setting, then press
ENTER
.