Comtech EF Data CDM-710, Installation And Operation Manual

Page: 199 / 242

CDM-710 Broadcast Satellite Modem Revision 11
Appendix A MN/CDM710.IOM
A–25
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
G=ASI Rx PLL Empty (Interface 1)
H=ASI Rx PLL Full (Interface 1)
I=ASI Rx PLL Lower Limit Reached (Interface 1)
J=ASI Rx PLL Upper Limit Reached (Interface 1)
K=Reserved
L=Reserved
M=Reserved
N=Reserved
O=Reserved
P=ASI Rx SERDES Error (Interface 1)
Q=ASI Rx SERDES DCM Unlocked (Interface 1)
R= Reserved
S= Reserved
T=HSSI Rx Buffer Underrun (Interface 1)
U=HSSI Rx Buffer Overflow (Interface 1)
V=Reserved
W=Reserved
X=Framer SERDES Rx Fault (Interface 1)
Y=Framer SERDES Rx Fault (Interface 2)
Z=Reserved
[=Reserved
d=New Faults
0=No new faults
1=New faults since last check
Firmware
Revisions
N/A 1 byte Query only.
Query the version information of the system, where:
i = Bulk Image number (1 or 2)
a = Firmware Image
b = Firmware Revision
c = Firmware Date
Example: FRW?1
FRW?
FRW*
FRW# FRW?i FRW={CR}Boot:{CR}a,b,c{CR}
Bulki:{CR}a,b,c{CR}a,b,c…
Gigabit Egress
FEC Enable
GEF= 2 bytes Command or Query.
Gigabit Egress FEC Enable/Disable in the form sn, where:
s=Slot (1, 2)
n=Enable / Disable, where
0 = Disabled
1 = Enabled
GEF=
GEF#
GEF?
GEF* GEF?s GEF=sn
Gigabit Egress
Multicast Group
Address
GEG= 16 bytes Command or Query.
Gigabit Egress Multicast Group Address. The multicast stream egressing from
the gigabit interface will have this IP address as the source IP address in the
form siii.iii.iii.iii, where:
s=Slot (1, 2)
i=IP Address
GEG=
GEG#
GEG?
GEG* GEG?s GEG=siii.iii.iii.iii