manualshive.com logo in svg

Comtech EF Data CDM-710, Installation And Operation Manual

Share
Download
Comtech EF Data CDM-710 Installation And Operation Manual Download Page 172

CDM-710 Broadcast Satellite Modem  

Revision 11 

CDI-70 1000 Base-T Gigabit Ethernet (GigE) Interface Module 

MN/CDM710.IOM 

 10–6 

10.5 

Flash Upgrading the CDI-70 GigE Interface 

IMPORTANT

 

A CDM-710/710L Broadcast Satellite Modem running Firmware Ver. 4.1.6 or 
higher requires a CDI-70 1000 Base-T Gigabit Ethernet Interface running 
Firmware Ver. 1.1.2 or higher. 

 

The CDM-710’s CDI-70 GigE Interface module contains its own processor and memory. On 
occasion, CEFD may release new software to fix anomalies or add functionality to this interface. 
Both the CDM-710 and the CDI-70 use ‘flash memory’ technology internally. This makes 
software upgrading very simple, and updates can now be obtained via the Internet (

Figure 10-3

), 

E-mail, or on CD.  

This section outlines the complete upgrading process as follows: 

•

 

New firmware can be downloaded via the Internet to an external PC.  

•

 

The upgrade can be performed without opening the unit by simply connecting the GigE 
Interface’s ‘J1’ 10/100/1000 Ethernet Traffic port to the Ethernet port of the external PC. 

•

 

Once downloaded, the firmware update is transferred using the CEFD application 

CReflash.exe

. 

For complete information about firmware numbers, file versions, and formats, see 

Chapter 4. 

FLASH UPGRADING. 
 

 
 
 
 
 
 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 10-3. Flash Update via Internet 

Summary of Contents for CDM-710



















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands